Salform metal forming machinery
   Machine Tools for Metal Forming & Metal Working!
Salform.com
Salform.com Cleveland quality Model E machines are available in seven sizes including direct belt drive machines that operate at high spindle speeds for small hole tapping, fixed gear head machines with spindle speeds for larger hole tapping and machines equipped with an arrangement for shifting from back gear to direct drive for greater speed ranges.
Salamon Industries
Salamon Industries
Cleveland Tapping Machine Model E Series Cleveland Tapping Machine Model E-2
Multiple-Spindle Head Handles Close Center Tapping Problems
The photo (above) is a close-up view of a Model E-2 machine designed for high production tapping of four large close center holes. A 2.7 second cycle time is achieved with an eight station index table, including spring-loaded holddowns, rapid advance and retract, and automatic discharge.
Cleveland Tapping Machine Model E-2 Another case of Cleveland automation shows a Model E-2 machine (above) designed and tooled to tap automotive oil filter plates at a production rate of 2700 per hour. Parts are loaded three at a time, tapped three at a time and automatically ejected. The index unit is a four station pneumatic table. Air operated holddowns are used to achieve squareness tolerances. Cleveland systems such as this are adaptable for completely automated cycling.
Cleveland Tapping Machines Model E SPECIFICATIONS
Model No. E-0 E-1 E-2 E-3 E-3U E-4 E-4U
Cap., main spindle* Up to 1/2" 1/4" to 5/8" 3/8" to 1" 7/8" to 1 7/8" 3/8" to 1 7/8" 1 1/4" to 2 3/4" 3/8" to 2 3/4"
CapacIty, multiple head* Eight 6-32
Four 1/4"
Three 3/8"
Four 1/4"
Three 5/8"
Six 3/8"
Two 1"
Three 3/4"
Two 1"
Eight 3/8"
Two 1 1/2"
Three 1"
Two 1 1/2"
Eight 3/8"
DIrect Drive
Splndle RPM
See below ** 880,660,
495,360
540,420,
315,230
660,525,
410,310
635.430,
275
Back Geared
Splndle RPM
265.210,
165,125
265,210,
165,125
170,115,
73
170,115,
73
Spindle Morse Taper No. 2 No. 3 No. 4 No. 5 No. 5 No. 5 No. 5
Spindle Stroke, max. 2 1/2" 5" 5" 4 3/4" 4 3/4" 4 3/4" 4 3/4"
Motor HP 1 1/2 1 1/2 3 3 3 3 3
Nominal Motor RPM*** 1200 900 900 900 900 900 900
Steet Core VáBeIt Sect. A Sect. B Sect. B Sect. B Sect. B Sect. C Sect. C
Work Clearence,
Spindle to Table
Max. 17 1/4"
Min. 3 1/4"
Max.19 21/32"
Min. 4 13/32"
Max. 18 29/32"
Min. 3 21/32"
Max. 20 27/32"
Min. 5 19/32"
Max. 20 27/32"
Min. 5 19/32"
Max. 20 27/32"
Min. 5 19/32"
Max. 20 27/32"
Min. 5 19/32"
Work Table Surface 16" L. to R.
12 1/2" F. to B.
21" L. to R.
16 1/4"F.to B.
21" L. to R.
16 1/4"F.to B.
23" L. to R.
20" F. to B.
23" L. to R.
20" F. to B.
23" L. to R.
20" F. to B.
23" L. to R.
20" F. to B.
Throat Depth 8 1/8" 12 1/2" 12 1/2" 12 1/2" 12 1/2" 12 1/2" 12 1/2"
Overall HeIght 6'-11 1/2"" 7'-10" 7'-10" 8'-6" 8'-6" 8'-6" 8'-6"
Base Dimensions 21" wide
30" deep
30 1/2" wide
45" deep
30 1/2" wide
45" deep
30 1/2" wide
45" deep
30 1/2" wide
45" deep
30 1/2" wide
45" deep
30 1/2" wide
45" deep
Approx. Shipping Wt. 1100 Ibs. 2300 lbs. 2400 lbs. 2700 lbs. 2700 lbs. 2700 lbs. 2700 lbs.
*Capacities expressed in N.C. Thread sizes, in mild steel, at 60 surface feet per minute.
**5 speed ranges, RPM: 460-633-875, 582-805-1130, 700-970-1320, 805-1130-1480, 1130-1480-1810.
***Motors are special high reversal type.

Overview  | Specifications  |

Toll Free
(800) 646-7584

info@salform.com
Salamon Industries
Salform.com Salform.com
©2017 Salform.com All rights reserved