Salform metal forming machinery
   Machine Tools for Metal Forming & Metal Working!
Salform.com
Salform.com ERCO model HD forming & flanging machine is used to form; plain, return bend, offset, flared, large radius and half-round flanges on curved and straight edges of sheet metal; flange external and internal edges on circular discs; external flanges on ends of cylinders and crowned sheet metal and internal flanges, on soft or semi-hard steel, soft or semi-soft brass, copper, soft aluminum, heat treated aluminum alloys and monel metal.
Salamon Industries
Salamon Industries
TYPICAL APPLICATIONS
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO HD Former Flanger Applications
ERCO Forming and Flanging Machine

MODEL HD

FORMING & FLANGING MACHINE

APPLICATIONS:
  • Form plain, return bend, offset, flared, large radius and half-round flanges on curved and straight edges of sheet metal, etc.
  • Flange external edges on circular discs and internal edges when the radius of the inside curved edge or hole is not less than 6".
  • Form external flanges on ends of cylinders and crowned sheet metal having 4” and larger radii curves, and internal flanges on 5” and larger radii.
  • Perform work on soft or semi-hard steel, soft or semi-soft brass, copper, soft aluminum, heat treated aluminum alloys and monel metal where hand work is too costly and production does not justify expensive power press or die equipment.
For forming or flanging edges of sheet metal where contour is irregular, the Erco Model HD utilizes the oscillation of a short brake tool against a hold-down tool at variable strokes per minute. A hand wheel on the front of the machine controls the total angle of this motion.

The metal passes through the working head in one or more stages, depending upon the' shape. A small part of the sheet is brought up at each upstroke of the brake head to produce smooth, well formed edges. The narrow working surface enables the forming of small radii and complicated shapes without leaving wrinkled flanges.

The rapidly oscillating brake head speeds the operation. After each up-stroke the work is quickly released for hand feeding through the machine. It is held down and released automatically.

Overview  | Applications  | Operation  | Bend Tables  |

Salamon Industries
250 John Downey Dr.
New Britain, CT 06051
Phone (860) 223-7216
Fax (860) 223-7230

Toll Free
(800) 646-7584

info@salform.com
Salamon Industries
Salform.com Salform.com
©2012 Salamon Industries All rights reserved